Table of Contents
Advertisement
Prestige 100MH PSTN Router/Hub
10.8 Command Interpreter Mode
This option allows you to enter the command interpreter mode. A list of valid commands can
be found by typing [help] at the command prompt. For more detailed information, check the
ZyXEL Web site or send an e-mail to the ZyXEL Support Group.
10.9 Call Control
The Prestige provides two Call Control Management functions: Budget Management and
Blacklist.
The Budget Management function allows you to set a limit on the total outgoing call time of
the Prestige over a period of time. When the total outgoing call time exceeds the limit, the
current call will be dropped and any future outgoing calls will be blocked.
The Blacklist function prevents the Prestige from re-dialing to an unreachable phone number.
It is a list of phone numbers, up to a maximum of 14, to which the Prestige will not make an
outgoing call. If the Prestige tries to dial to a phone number and fails a certain number of
(configurable in Menu 24.9.1) times, then the phone number is put onto the blacklist. You will
have to enable the number manually before the Prestige will dial that number again.
To enter the Call Control menu, select option [9. Call Control] in Menu 24 to go to Menu
24.9 - System Maintenance - Call Control, as shown in Figure 10-15.
Figure 10-15.
Chapter 10 System Maintenance
10-16
Menu 24.9 - System Maintenance - Call Control
1. Blacklist
2. Budget Management
3. Call History
Enter Menu Selection Number:
Menu 24.9 - System Maintenance - Call Control
Advertisement
Table of Contents
Troubleshooting
