ZyXEL Communications Prestige 652 User Manual page 281

Zyxel adsl security router user's guide
Hide thumbs Also See for Prestige 652:
Table of Contents

Advertisement

LOG MESSAGE
Start Phase 2: Quick Mode
!! IKE Negotiation is in process
!! Duplicate requests with the same
cookie
!! No proposal chosen
!! Verifying Local ID failed
!! Verifying Remote ID failed
!! Local / remote IPs of incoming
request conflict with rule <#d>
!! Invalid IP <IP start>/<IP end>
!! Remote IP <IP start> / <IP end>
conflicts
!! Active connection allowed exceeded
!! IKE Packet Retransmit
!! Failed to send IKE Packet
!! Too many errors! Deleting SA
IPSec Log
Table 27-1 Sample IKE Key Exchange Logs
Prestige 652 ADSL Security Router
DESCRIPTION
Phase 2 negotiation is beginning using Quick Mode.
The Prestige has begun negotiation with the peer for
the connection already, but the IKE key exchange has
not finished yet.
The Prestige has received multiple requests from the
same peer but it is still processing the first IKE packet
from that peer.
The parameters configured for Phase 1 or Phase 2
negotiations don't match. Please check all protocols
and settings for these phases. For example, one party
may be using 3DES encryption, but the other party is
using DES encryption, so the connection will fail.
During IKE Phase 2 negotiation, both parties exchange
policy details, including local and remote IP address
ranges. If these ranges differ, then the connection fails.
If the security gateway is "0.0.0.0", the Prestige will
use the peer's "Local Addr" as its "Remote Addr". If this
IP (range) conflicts with a previously configured rule
then the connection is not allowed.
The peer's "Local IP Addr" range is invalid.
If the security gateway is "0.0.0.0", the Prestige will
use the peer's "Local Addr" as its "Remote Addr". If a
peer's "Local Addr" range conflicts with other
connections, then the Prestige will not accept VPN
connection requests from this peer.
The Prestige limits the number of simultaneous Phase
2 SA negotiations. The IKE key exchange process fails
if this limit is exceeded.
The Prestige did not receive a response from the peer
and so retransmits the last packet sent.
The Prestige cannot send IKE packets due to a
network error.
The Prestige deletes an SA when too many errors
occur.
27-3

Advertisement

Table of Contents
loading

Table of Contents