Figure 19-16 Menu 24.7.1 As Seen Using The Console Port; Figure 19-17 Example Xmodem Upload - ZyXEL Communications Prestige 652 User Manual

Prestige 652 ADSL Security Router
19.4.8 Uploading Firmware File Via Console Port
Step 1. Select 1 from Menu 24.7 – System Maintenance – Upload Firmware to display Menu 24.7.1
- System Maintenance - Upload System Firmware, then follow the instructions as shown in
the following screen.
To upload system firmware:
1. Enter "y" at the prompt below to go into debug mode.
2. Enter "atur" after "Enter Debug Mode" message.
3. Wait for "Starting XMODEM upload" message before activating
4. After successful firmware upload, enter "atgo" to restart the
Warning: Proceeding with the upload will erase the current system
firmware.

Figure 19-16 Menu 24.7.1 as seen using the Console Port

Step 2. After the "Starting Xmodem upload" message appears, activate the Xmodem protocol on your
computer. Follow the procedure as shown previously for the HyperTerminal program. The
procedure for other serial communications programs should be similar.
19.4.9 Example Xmodem Firmware Upload Using HyperTerminal
Click Transfer, then Send File to display the following screen.
After the firmware upload process has completed, the Prestige will automatically restart.
19-14
Menu 24.7.1 - System Maintenance - Upload System Firmware
Xmodem upload on your terminal.
router.
Do You Wish To Proceed:(Y/N)

Figure 19-17 Example Xmodem Upload

Type the firmware file's
location, or click Browse to
look for it.
Choose the Xmodem protocol.
Then click Send.
Firmware and Configuration File Maintenance