Call scheduling allows you to dictate when a remote node should be called and for how long.
23.1 Introduction
The call scheduling feature allows the Prestige to manage a remote node and dictate when a remote node
should be called and for how long. This feature is similar to the scheduler in a video cassette recorder that
lets you specify times to record programs. You can apply up to 4 schedule sets in Menu 11.1 - Remote
Node Profile. From the main menu, enter 26 to access Menu 26 - Schedule Setup as shown next.
Schedule
Set #
------
1
2
3
4
5
6
Lower numbered sets take precedence over higher numbered sets thereby avoiding scheduling conflicts. For
example, if sets 1, 2, 3 and 4 are applied in the remote node then set 1 will take precedence over set 2, 3 and
4 as the Prestige, by default, applies the lowest numbered set first. Set 2 will take precedence over set 3 and
4, and so on.
You can configure up to twelve schedule sets and apply up to four schedule sets for a remote node.
To delete a schedule set, enter the set number and press [SPACE BAR] or
Call Scheduling
Menu 26 - Schedule Setup
Name
----------------
AlwaysOn
______________
______________
______________
______________
______________
Enter Schedule Set Number to Configure=
Edit Name=
Press ENTER to Confirm or ESC to Cancel:
Figure 23-1 Menu 26 - Schedule Setup
[DELETE] in the Edit Name field.
Prestige 652 ADSL Security Router
Call Scheduling
Schedule
Set #
Name
------
---------------
7
______________
8
______________
9
______________
10
______________
11
______________
12
______________
Chapter 23
23-1