This chapter teaches you how to manage your SAs by using the SA Monitor in SMT menu 27.2.
1.1. Introduction
A Security Association (SA) is the group of security settings related to a specific VPN tunnel. This menu
(shown next) displays active VPN connections.
An SA times out automatically after one minute if there is no traffic.
1. Use the Refresh function to display active VPN connections.
2. Use the Disconnect function to cut off active connections.
Type 2 in Menu 27 - VPN/IPSec Setup, and then press [ENTER] to go to Menu 27.2 - SA Monitor.
#
---
--------------------------------
1
Taiwan : 3.3.3.1 – 3.3.3.3.100
2
3
4
5
6
7
8
9
10
Press ENTER to Confirm or ESC to Cancel:
FIELD
#
This is the security association index number.
Name
This field displays the identification name for this VPN policy. This name is
unique for each connection where the secure gateway IP address is a
SA Monitor
Menu 27.2 - SA Monitor
Name
Select Command= Refresh
Select Connection= N/A
Figure 26-1 Menu 27.2 — SA Monitor
Table 26-1 Menu 27.2 — SA Monitor
DESCRIPTION
Prestige 652 ADSL Security Router
Encap.
IPSec ALgorithm
---------
----------------
Tunnel
ESP DES MD5
Chapter 26
SA Monitor
EXAMPLE
1
Taiwan
26-1