Prestige 652 ADSL Security Router
IP Options:
The next table explains fields in Menu 11.3
FIELD
IP Address
Press [SPACE BAR] and then [ENTER] to select Dynamic if the remote
Assignment
node is using a dynamically assigned IP address, or Static if it is using
a static (fixed) IP address. You will only be able to configure this in the
ISP node (also the one you configure in menu 4), all other nodes are
set to Static.
Rem IP Addr
This is the IP address you entered in the previous menu.
Rem Subnet
Type the subnet mask assigned to the remote node.
Mask
My WAN Addr
Some implementations, especially UNIX derivatives, require separate
IP network numbers for the WAN and LAN links and each end to have a
unique address within the WAN network number. In that case, type the
IP address assigned to the WAN port of your Prestige.
NOTE: Refers to local Prestige address, not the remote router address.
NAT
Press [SPACE BAR] and then [ENTER] to select Full Feature if you
(Network
have multiple public WAN IP addresses for your Prestige. Select SUA
Address
Only if you have just one public WAN IP address for your Prestige. The
Translation)
SMT uses Address Mapping Set 255 (menu 15.1 - see section 8.3.1).
Select None to disable NAT.
Address
When Full Feature is selected in the NAT field, configure address
5-6
Menu 11.3 - Remote Node Network Layer Options
IP Address Assignment= Static
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= SUA Only
Address Mapping Set=2
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= None
IP Policies= 3,4,5,6
Press ENTER to Confirm or ESC to Cancel:
Figure 5-3 Remote Node Network Layer Options
Table 5-2 Remote Node Network Layer Options
Bridge Options:
Ethernet Addr Timeout(min)= 0
Remote Node Network Layer Options.
–
DESCRIPTION
EXAMPLE
Static
SUA
Only
Remote Node Configuration
2