Roland TrueVIS VG3-640 User Manual page 87

Setup of Registered Media
Fit the paper tube securely right to the end of the end cap.
(3)
Push the left media holder into the paper tube.
3.
Hold down
paper tube.
Media is fed out 10 mm (0.39 in.) each time you hold down this button. Holding down the button
lets you feed out paper continuously.
MEMO
Feed out the media until it can wrap around at least 1/4 of the paper tube.
When using the FORWARD setting
4.
Follow the procedure below to adjust the positions of the media holders.
(1)
Move both media holders so that it is possible to see the paper tube from the right edge of the me-
dia.
86
Basic Operations
on the operation panel to feed out the media until the tip of the media reaches the
When using the BACKWARD setting