Roland TrueVIS VG3-640 User Manual page 168

WARNING
Never use the platen or dryer for any purpose for which they are not intended, such as to dry
clothing.
Doing so may cause overheating, resulting in fire or accident.
IMPORTANT
Use the machine in an environment with an ambient temperature of 20 to 32°C (68 to 90°F).
If the machine is used at an ambient temperature lower than 20°C (68°F), then depending on the type or width of the
media, wrinkling or temperature-caused unevenness may occur. If this happens, try lowering the temperature of the
media heating system by about 2°C. To obtain stable printing results, however, use the machine in an environment with
an ambient temperature of 20°C to 32°C (68°F to 89.6°F).
MEMO
By using an auxiliary drying unit, you can speed up the drying of the ink more. For information about purchasing an
auxiliary drying unit, contact your authorized Roland DG Corporation dealer or visit our website (
www.rolanddg.com/
).
RELATED LINKS
・ P. 178 Using an Auxiliary Drying Unit (DU3)
Adjusting the Ink-drying Method
http://
Optimizing the Output Quality
167