Roland TrueVIS VG3-640 User Manual page 22

Level 1 Level 2
[Preferences] [Media Edge Detection]
[Print Light]
[Take-up]
[Remaining Media Management]
[Extended Dryer]
[Blower Fan]
[Skewing Correction Support at Setup]
[Printing Test Position]
[Perforated Sheet Cutting]
[Cleaning during Printing]
[Standby Heater Temperature]
[Prefeeding at Output]
[Priority for Cutting Settings]
[Ink Circulation Interval]
[Notifications On/Off]
[Sleep Time]
[Reset to Factory Defaults]
Level 3 Level 4
*2
Part Names and Functions
Details
Sets whether to detect the leading and trailing edges of
the media. When using transparent media, whose edges
cannot be detected, the media can be set up without de-
tecting the edges by selecting [Disable].
Select [On], [Off], or [Auto] for the print light. Select
[Auto] to automatically turn the light on/off according
to the status of the printer.
Sets the [Take-up Method] and [Take-up Direction] for
the take-up unit.
Sets the amount of remaining media that has been set up
and displays this amount. This amount can also be print-
ed on the media.
These settings are required when using an auxiliary dry-
ing unit. Set them individually to [Enable] and [Disable].
Provides support, preventing skewed installation of the
media by making a sound and operating an automatic
suction fan during setup.
Sets the direction for test pattern printing: [Feed] or
[Scan].
Sets the perforated sheet cutting conditions.
Selects the frequency of cleaning during printing from
[No Cleaning], [Every Page], [Periodically (Job Priori-
ty)], and [Periodically (Time Priority)]. After selecting
[Periodically (Job Priority)] or [Periodically (Time Pri-
ority)], set the time from the previous cleaning to the
next cleaning.
Sets the heater temperature when media has not been
set up.
Prefeeds the media when it is fed out, such as during
cutting, preventing the pulling of the media with undue
force.
Sets whether to prioritize the cutting settings of the ma-
chine or the software RIP.
Sets the frequency of white ink circulation.
When [Enable] is selected, notifications are displayed at
the appropriate times.
• [Ink Mixing Notification]
• [Middle Pinch Roller Placement Notification]
• [Media Clamp Placement Notification]
Sets the time until sleep mode (the state in which the
power-saving features operate) activates.
Returns all settings other than [Language] and [Units] to
their factory default values.
21
Basic Information