Roland TrueVIS VG3-640 User Manual page 278

• If you complete the work without viewing the instructions, tap [Finish All].
6.
Detach the blade holder.
7.
Replace the blade.
(1)
Press the pin (A) to push out the old blade (B).
(2)
Insert a new blade (C).
Orient the tip of the blade (D) correctly.
B
8.
Install the blade holder into the cutting carriage.
9.
Tighten the screw.
Tug the blade holder upward to make sure it does not come loose.
A
Replacing the Blade/Separating Knife
C
OK Not OK
Replacing Consumable Parts
D
277