Roland TrueVIS VG3-640 User Manual page 192

• Media feed direction misaligned in the positive direction
• Move the cutting position in the negative direction.
• Print head movement direction (scan direction) misaligned in the negative direction
• Move the cutting position in the positive direction.
5.
Set the correction values in the feed direction of the media (the feed direction) and the direction of
print head movement (the scan direction).
(1)
Tap or
tion of the media (the feed direction).
(2)
Tap or
of print head movement (the scan direction).
6.
Tap [Save] to confirm your entry.
7.
Tap to go back to the original screen.
8.
Tap [Resume] to restart the cutting operation.
Tap [Cancel Output] to cancel the cutting operation.
MEMO
•
Default settings
•
[Correction Value (Feed)] (correction value of the media feed direction): 0.00 mm
•
[Correction Value (Scan)] (correction value of the print head movement direction): 0.00 mm
RELATED LINKS
・ P. 187 Correcting the Misalignment of Printing and Cutting
Accurately Adjusting the Settings for Printing and Cutting
next to [Correction Value (Feed)] to set the correction value in the feed direc-
next to [Correction Value (Scan)] to set the correction value in the direction
Optimizing the Output Quality
191