Roland TrueVIS VG3-640 User Manual page 18

No. Name
[Cleaning]/[Nozzle Drop-out Test]
[Blade Adjustment]
[Move]
[Sheet Cutting]
Part Names and Functions
Details
Displays the menu related to the printing test and clean-
ing for the nozzle drop-out check.
Sets cutting conditions. This is only enabled when media
is loaded.
Feeds the media and moves the carriage. You can also set
the position moved to as the right edge of the output
area (the base point).
P. 208Adjusting the Output-start Loca-
tion
Activates the separating knife to separate the media. You
can also perforate the media to take it up and separate it
at a later time.
17
Basic Information