Roland TrueVIS VG3-640 User Manual page 71

Setup of Registered Media
(1)
Tap [Preferences]>[Take-up]>[Take-up Direction].
(2)
Select [Backward] or [Forward].
(3)
Tap [Save].
(4)
Tap
3.
Open the front cover.
4.
Move the media clamps to the outside of the grit rollers on the left and right edges respectively.
5.
(Move to the rear of the printer.) Release the locking mechanisms of the media holders, and then draw
them to the left and right ends respectively.
70
Basic Operations
to go back to the original screen.