Roland TrueVIS VG3-640 User Manual page 76

IMPORTANT
• Be sure to use the left and right pinch rollers. The force with which the media is pinched varies between
the middle pinch rollers and the left and right pinch rollers. Using the middle pinch rollers to pinch the
media edges will lead to unstable media feeding.
• If you want to readjust the media position, return to the back of the printer, release the media holders,
and then redo the procedure from step 1. If you just stand at the front of the printer and hold the media to
readjust its position forcibly, the media will be skewed during printing or will come loose, which will affect
the printing quality.
MEMO
To smoothly move the pinch rollers, push down close to the rail.
6.
Move the middle pinch rollers (B) over all the remaining grit rollers (A) covered by the media.
There are grit patterns (C) wherever there are grit rollers.
IMPORTANT
• Place the middle pinch rollers over all the grit patterns within the media width. If you have forgotten to
place the middle pinch rollers, the media will be skewed during printing or will come loose, which will have
an effect on the printing quality.
• The middle pinch roller will not lower onto the three grit rollers from the right end. Place the middle pinch
roller on a grit roller other than these three.
Setup of Registered Media
Basic Operations
75