Roland TrueVIS VG3-640 User Manual page 19

Part Names and Functions
Menu List
Tap to display the list of operations.
MEMO
[Media Settings] only appears when media is loaded.
Level 1 Level 2
[Media Set- [List of Media Settings]
*1
tings]
[Printing Set-
tings]
[Cutting Set-
tings]
18
Basic Information
Level 3 Level 4
[Print Head Height]
[Batch Automatic Correction]
[Feed Correc- [Simple Correc-
tion] tion (Auto)]
[Detailed Correc-
tion (Manual)]
[Media Gap Ad- [Simple Correc-
justment] tion (Auto)]
[Detailed Correc-
tion (Manual)]
[Blade Adjustment]
[Print & Cut Position Adjustment]
[Crop Cut Position Adjustment]
[Cutting Distance Correction]
[Over Cut]
Details
Lists the settings of the media that has been set up. Tap
a setting to move to a screen for changing this setting.
Checks/changes the head height.
Adjustments are performed in the following order: [Multi
Sensor Adjustment], [Media Gap Adjustment], then
[Feed Correction].
Adjusts the media feed amount during printing. With
[Simple Correction (Auto)], a test pattern is printed and
then read with a sensor to automatically set the correc-
tion value.
Adjusts the media feed amount during printing. With
[Detailed Correction (Manual)], a test pattern is print-
ed, and then the correction value is entered manually
after the printed correction value is checked visually.
Corrects the ink landing position. With [Simple Correc-
tion (Auto)], a test pattern is printed and then read with
a sensor to automatically set the correction value.
Corrects the ink landing position. With [Detailed Correc-
tion (Manual)], a test pattern is printed, and then the
correction value is entered manually after the printed
correction value is checked visually.
Sets cutting conditions such as [Blade Force] and [Cut-
ting Speed].
Corrects misalignment in the printing position and the
cutting position during printing and cutting.
Corrects misalignment in the crop mark positions and the
cutting position when cutting with crop marks.
Corrects misalignment in the cutting line length due to
changes in the media movement distance.
Cutting the corners of the border of the cutting line
slightly longer makes it possible to cut the corners at-
tractively.