Roland TrueVIS VG3-640 User Manual page 69

Setup of New Media
Adjust the reading sensor to the optimal condition. If the adjustment failed, respond to the
failure according to the information in
c. Tap [Next].
d. Perform a printing test on the [Detailed Feed Correction (Manual)] screen.
Set the correction value from the printing test result. For more information, refer to
ual Adjustment: Reducing Horizontal Bands (Feed Correction Function)(P.
e. Tap [Save and Proceed].
f. Perform a printing test on the [Detailed Media Gap Adjustment (Manual)] screen.
Set the correction values from the printing test result. For more information, refer to
ual Adjustment: Adjusting the Misalignment of the Ink Landing Position (Media Gap Adjust-
ment)(P.
g. Tap [Save and Exit].
This completes the setup of the media.
68
Basic Operations
155).
Correcting the Reading Sensor(P. 199).
Man-
153).
Man-