Roland TrueVIS VG3-640 User Manual page 58

7.
Move the left and right pinch rollers, placing them on both edges of the media.
Position them approximately 10 mm (0.39 in.) from each edge of the media.
IMPORTANT
• Be sure to use the left and right pinch rollers. The force with which the media is pinched varies between
the middle pinch rollers and the left and right pinch rollers. Using the middle pinch rollers to pinch the
media edges will lead to unstable media feeding.
• If you want to readjust the media position before securing it in place, redo the procedure from step 5.
MEMO
To smoothly move the pinch rollers, push down close to the rail.
8.
Move the middle pinch rollers (B) over all the remaining grit rollers (A) covered by the media.
There are grit patterns (C) wherever there are grit rollers.
Setup of New Media
57
Basic Operations