Roland TrueVIS VG3-640 User Manual page 82

IMPORTANT
• Place the middle pinch rollers over all the grit patterns within the media width. If you have forgotten to
place the middle pinch rollers, the media will be skewed during printing or will come loose, which will have
an effect on the printing quality.
• The middle pinch roller will not lower onto the three grit rollers from the right end. Place the middle pinch
roller on a grit roller other than these three.
• There may be extra middle pinch rollers depending on the width of the media being used. Move the extra
middle pinch rollers to positions where no grit patterns are present. Where no grit patterns are present,
the middle pinch rollers will not come down.
10.
Hold the media at the center and pull it out, being sure to keep it straight and all areas of the media to
be taut.
11.
Lower the loading lever (front).
Setup of Registered Media
Basic Operations
81