Roland TrueVIS VG3-640 User Manual page 132

7.
Check to make sure the dot drop-out or dot displacement has been corrected.
If the problem persists, try performing normal cleaning again. If the printer has been used for a
long period, dot drop-outs may not be fixed even after performing normal cleaning two or three
times. If this is the case, clean using a different method.
RELATED LINKS
・ P. 118 Performing a Nozzle Drop-out Test
・ P. 251 When Normal Cleaning Is Not Effective
Preparations for Printing and Cutting Output
Printing and Cutting Method
131