Roland TrueVIS VG3-640 User Manual page 66

2. Register the media.
Procedure
1.
Tap [Setup].
2.
Select [New].
3.
Tap [Next].
4.
Enter a new media name and tap [OK].
5.
Tap [Next].
6.
The [Setup Method] screen appears. Select whether to use the take-up unit.
7.
Tap [Start Setup].
The cutting carriage moves and detects the width of the media and the positions of the media
clamps. This operation is called initialization.
8.
When [The media could not be detected automatically. Manually set the printing area.] appears, use the
following procedure to configure the settings.
Setup of New Media
65
Basic Operations