Roland TrueVIS VG3-640 User Manual page 77

Setup of Registered Media
• There may be extra middle pinch rollers depending on the width of the media being used. Move the extra
middle pinch rollers to positions where no grit patterns are present. Where no grit patterns are present,
the middle pinch rollers will not come down.
7.
Lower the loading lever (front).
IMPORTANT
If you want to readjust the media position, return to the back of the printer, release the media holders, and
then redo the procedure from step 1. If you just stand at the front of the printer and hold the media to read-
just its position forcibly, the media will be skewed during printing or will come loose, which will affect the
printing quality.
8.
Line up the edges of the media with the centers of the holes of the left and right media clamps.
9.
Close the front cover.
76
Basic Operations