4. Load the media in the take-up unit.
If you will not use the take-up unit, proceed to
Procedure
1.
Lower the dancer roller toward the rear.
2.
Follow the procedure below to load a paper tube on the media holders of the take-up unit.
Prepare a paper tube wider than the media that has been set up.
IMPORTANT
Paper tubes are consumable items.
Watch the condition of the paper tube and replace at an appropriate time so that the media can be taken up
in good working order.
(1)
Release the media holders to enable their movement.
(2)
Fit the paper tube onto the right end cap.
5. Configure settings to match the media.(P.
Setup of New Media
53).
49
Basic Operations