Roland TrueVIS VG3-640 User Manual page 21

Part Names and Functions
Level 1 Level 2
[Maintenance] [Wiper Replacement]
[Blade Replacement]
[Separating Knife Replacement]
[Ink Renewal]
[Ink Renewal Inside Damper]
[Ink Circulation]
[Wiper Tray Cleaning]
[Wiper Tray Discharging]
[Drain Bottle]
20
Basic Information
Level 3 Level 4
*2
*2
Details
Replaces the wiper and tray pad.
Replaces the blade used in cutting.
Replaces the separating knife used in media separation.
Perform this operation when ink discharge issues or un-
even colors are not resolved even after [Normal Clean-
ing], [Medium Cleaning], [Powerful Cleaning], and
[Manual Cleaning]. However, this operation consumes a
large amount of ink and may damage the print heads, so
do not perform it more than necessary.
Use this operation to stabilize output when uneven color
issues with white ink are not resolved even after shaking
the pouch tray to mix the ink. However, this operation
consumes a large amount of ink and may damage the
print heads, so do not perform it more than necessary.
Circulates ink to prevent uneven color issues with white
ink.
Use this operation to clean the wiper tray.
Use this operation to discharge the cleaning liquid from
the wiper tray.
A message appears when discharged fluid has collected
in the drain bottle. Use this menu item to discard this
fluid.