Roland TrueVIS VG3-640 User Manual page 198

3. Perform a cutting test.
Procedure
1.
Set up the media for which operations before cutting output, such as lamination, is complete.
2.
Tap .
3.
Tap [Media Settings]>[Cutting Settings]>[Crop Cut Position Adjustment].
4.
If [Separate Test for Printing/Cutting with Crop Marks] is off, tap
5.
Tap [Execute] next to [Cutting Test].
The [Move the blade over a crop mark.] screen appears.
6.
Tap ,
cutting test.
The center of the blade should only be over the crop marks, and does not need to be aligned with
the center of the crop marks.
7.
Tap [Execute].
The cutting test starts.
Accurately Adjusting the Settings for Cutting with Crop Marks
, , or to move the center of the blade over the crop marks to use in the
to turn it on.
Optimizing the Output Quality
197