Roland TrueVIS VG3-640 User Manual page 59

Setup of New Media
IMPORTANT
• Place the middle pinch rollers over all the grit patterns within the media width. If you have forgotten to
place the middle pinch rollers, the media will be skewed during printing or will come loose, which will have
an effect on the printing quality.
• The middle pinch roller will not lower onto the three grit rollers from the right end. Place the middle pinch
roller on a grit roller other than these three.
• There may be extra middle pinch rollers depending on the width of the media being used. Move the extra
middle pinch rollers to positions where no grit patterns are present. Where no grit patterns are present,
the middle pinch rollers will not come down.
9.
Lower the loading lever (front).
IMPORTANT
If you want to readjust the media position before securing it in place, redo the procedure from step 5.
10.
Line up the edges of the media with the centers of the holes of the left and right media clamps.
58
Basic Operations