Connecting The Recorder To A Dedicated Peripheral; Connecting With A Usb Cable - A&D TM-2441 Instruction Manual

8.8. Connecting the Recorder to a Dedicated Peripheral

8.8.1. Connecting with a USB cable

Refer to the instruction manual of ABPM Data Manager concerning
of the communication settings.
Connecting the cable
Connect an authorized USB cable to the micro USB terminal.
Insert the cable in the correct direction. Improper connection
may cause failure and malfunction. Confirm that the
terminal cable is properly connected.
Blood pressure cannot be measured during USB
communication.
Do not attach to the patient when the recorder is connected to
the cable. The cable may become wrapped around the body
or neck.
Preparation of a dedicated peripheral
Remove the recorder and cuff from the patient before
connecting the recorder (TM-2441) to a dedicated peripheral.
If the level 1
(TM-2441) to the peripherals after replacing the batteries.
Caution
is displayed, connect the recorder
77