A&D TM-2441 Instruction Manual page 14

Recorder for ambulatory blood pressure monitor

Hide thumbs Also See for TM-2441:

Table of Contents

If there is static electricity in the area of use (discharges from

devices or the surrounding area)

Before using the recorder, ensure that the operator and

patient have discharged any static electricity.

Humidify the room.

Use close to an IEEE802.11g/b/n wireless LAN device may

cause mutual interference to occur, which may result in

reduced communication speeds or prevent connection.

In this case, switch off the power supply to the device that

is not being used, or use the monitor in a different location.

9. Environmental Protection

Before disposing of the recorder, remove the lithium battery

from the recorder.

Caution

xii

Table of Contents