Table of Contents
Advertisement
Installing / Changing the Batteries
1.
Slide the battery cover up to open it.
2.
Remove the used batteries and insert
new batteries into the battery
compartment as shown, taking care that
the polarities (+) and (-) are correct.
3.
Slide the battery cover down to close.
Use only LR6, R6P or AA batteries.
CAUTION
Insert the batteries as shown in the battery compartment. If installed
incorrectly, the device will not work.
When
(LOW BATTERY mark) blinks in the display, replace all batteries
with new ones. Do not mix old and new batteries. It may shorten the battery
life, or cause the device to malfunction.
(LOW BATTERY mark) does not appear when the batteries are drained.
The battery life varies with the ambient temperature and may be shorter at
low temperatures. Generally, four new LR6 batteries will last approximately
for six months when used twice for measurement each day.
Remove the batteries if the device is not to be used for a long time.
The batteries may leak and cause a malfunction.
Use the specified batteries only. The batteries provided with the device are
for testing monitor performance and may have a limited life.
Connecting the Air Hose
Insert the air connector plug into
the air socket firmly.
Connecting the AC Adapter
Insert the AC adapter plug into the DC jack.
Next, connect the AC adapter to an
electrical outlet.
Use the specified AC adapter.
(Refer to page 19.)
When disconnecting the AC adapter from the electrical outlet, grasp and
pull the AC adapter body out of the outlet.
When disconnecting the AC adapter plug from the blood pressure
monitor, grasp and pull the AC adapter plug out of the monitor.
Using the Monitor
English 7
Step 3
Air Connector Plug
Air Socket
DC jack
AC adapter plug
Step 1
Step 2
Air Hose
Advertisement
Table of Contents
