A&D TM-2441 Instruction Manual page 54

Automated night blood pressure
The ANBP can specify up to six preset start time a day.
When parameters for the ANBP program are stored, the ANBP
is started and a "1 scope" is performed for each start time.
A "1 scope" consists of a set of blood pressure measurements
and interval times which are repeated to the number of the
measurement count. The last interval time is omitted.
Manual blood pressure measurement of the ANBP
When the
a "1 scope" is performed.
1 scope
T T
Start time
The ANBP is started at the same time when ANBP program is set.
(The ANBP becomes waiting mode until start time)
1 scope
T T
Start time
1 scope
T
T
Press the
to stop the "1 scope".
/ switch is pressed in S-BPM waiting mode,
Blood pressure measurement
1 scope
T
Press the
to start the manual-BPM.
Not measured
/ switch
Note
T
/ switch
34
ANBP
1 scope
T
T
Time
Start time
1 scope
T
T
Time
Start time
1 scope
T
T
Time
Start time
T: Interval time