A&D TM-2441 Instruction Manual page 32

Waiting mode
The A-BPM waiting mode is a state where the blood pressure is
not being measured during the interval time.
Start time
T
The S-BPM waiting mode is a state when the blood pressure is
not being measured during the interval time and between the
previous "1 scope" and next "1 scope".
Start time
T
1 scope
Dedicated peripheral
A dedicated peripheral means the computer on which the ABPM
Data Manager is installed. The ABPM Data Manager is stored on
an accessory CD.
Use a peripheral device that complies with the requirements for
medical electrical equipment (IEC60601-1) when connecting the
recorder to a peripheral device. Do not connect the recorder to another
devices (Example: IEC60950) in an area where medical equipment is
used. Use a USB cable shorter than 1.5 m (4.9 ft).
Start time
T
T T
T
Section
T
Waiting mode
Blood pressure measurement
T T
Section
Start time
Blood pressure measurement
T T
1 scope
12
Time
T: Interval time
Time
T: Interval time