S-Bpm Operations - A&D TM-2441 Instruction Manual

5.3.2. S-BPM Operations

To start S-BPM.
Step 1. Select the S-BPM program and store its parameters.
Step 2. Set the AUTO switch to "OFF".
Step 3. Operations are as follows:
S-BPM Programs
Office blood pressure
Automated office blood pressure AOBP
Home blood pressure
Automated night blood pressure
Automated self-blood pressure
To stop S-BPM.
Operations are as follows:
S-BPM Programs
Office blood pressure
Automated office
blood pressure AOBP
Home blood pressure
Automated night
blood pressure ANBP
Automated self-
blood pressure ASBP
#1: Refer to "6.2.1. S-BPM Programs".
OBP
Press the
pressure measurement.
HBP
Press the
measurement. At the next start time, the blood
pressure is measured or the buzzer sounds.
If you need to stop the recorder completely,
remove the batteries from the recorder or
switch to OBP, AOBP, or HBP.
OBP Press the
start the preset program
during waiting mode.
HBP
ANBP Preset program enters
standby until the "start time"
ASBP
or "start time of alarm".
Operations
/ switch to stop blood
/ switch to stop blood pressure
23
Operations
/ switch to
#1