A&D TM-2441 Instruction Manual page 74

When the start time is specified and the AUTO switch is
set to "OFF" during the automated measurement, it stops.
When the AUTO switch is set to "ON" again, the
automated measurement is started immediately.
The content of the item
Sleep mode:
The interval time for the automated measurement can be specified.
The interval time of sections 1 to 6 cannot be used. Refer to
"6.1.2. Sleep Function and Interval time".
Section:
24 hours can be divided into six sections at most. Each section can
specify the start time and interval. A-BPM can use only while the
automated measurement can be performed.
Automated measurement:
All of the A-BPM can be controlled. Specify the start time and
operation time. Refer to "8.3.2. A-BPM Program Examples".
Note
54