A&D TM-2441 Instruction Manual page 82

Automated self-blood pressure display
The ASBP can specify up to six preset start times for the alarm.
The buzzer sounds at each start time. Press the
switch to perform the "1 scope" when the buzzer sounds.
Refer to "6.2.1. S-BPM Programs" for the "1 scope".
When the last start time is the same as first start time, the
settings for start time finish. Next, specify the measurement
count and interval time for the "1 scope".
First start time of
alarm
Measurement count
Example Settings and simplified input
The buzzer sounds at 22:00 and 7:00.
Press the
The start time of section 1 =
The start time of section 2 =
The start time of section 3 =
The measurement count =
The interval time =
2nd start time of
/ switch to perform the "1 scope".
alarm
Interval time
22:00
7:00
22:00 ............... The same as section 1
2 times
0:01 minute
62
ASBP
/
3rd start time
of alarm