Stopping Measurement; Storing Environment Data - A&D TM-2441 Instruction Manual

6.1.3. Stopping Measurement

When the START/STOP switch is pressed during the blood
pressure measurement, the air is expelled immediately and the current
measurement is stopped. However, A-BPM is continued. The next
blood pressure measurement is performed in accordance with
A-BPM settings.
When measurement is stopped, the stop code
displayed on the OLED and is stored in the memory.

6.1.4. Storing Environment Data

The environment data is stored while the AUTO switch is set to
"ON" for A-BPM.
The environment data can be store for 12 hours at most.
Its download to the ABPM Data Manager may take 50 minutes.
Note
Note
30
E07 is