A&D TM-2441 Instruction Manual page 91

To suspend A-BPM
Step 1. Set the AUTO switch to "OFF".
Step 2. The
To Stop during A-BPM
When the START/STOP switch is pressed during blood
pressure measurement, the air is expelled immediately and the
current measurement is stopped. However, A-BPM is continued.
The next blood pressure measurement is performed in
accordance with A-BPM settings.
To measure blood pressure during A-BPM immediately
(Manual blood pressure measurement of A-BPM)
Step 1. If the OLED display is hidden, press the
START/STOP or EVENT switch to return to the A-BPM
waiting mode display. The A-BPM waiting mode is a state
whereby blood pressure is not measured during the
interval time.
Step 2. Press the START/STOP switch during the A-BPM waiting
mode.
To double the interval time or reset it
When sleep mode is "ON" and the EVENT switch is pressed
during A-BPM waiting mode, the interval time is doubled.
mark is hidden. A-BPM is suspended.
71