Using The Monitor; Installing / Changing The Batteries; Connecting The Air Hose; Connecting The Ac Adapter - A&D UA-767 Plus Instruction Manual

Installing / Changing the Batteries

1. Slide the battery cover up to open it.
2. Remove the used batteries and insert
new batteries into the battery
compartment as shown, taking care that
the polarities (+) and (-) are correct.
Use only R6P, LR6 or AA batteries.
3. Slide the battery cover down to close it.
CAUTION
Insert the batteries as shown in the battery compartment. If installed incorrectly,
the device will not work.
When
with new ones. Do not mix old and new batteries. It may shorten the
battery life, or cause the device to malfunction.
(LOW BATTERY mark) does not appear when the batteries are drained.
The battery life varies with the ambient temperature and may be shorter
at low temperatures.
Remove the batteries if the device is not to be used for a long time.
The batteries may leak and cause a malfunction.
Use the specified batteries only. The batteries provided with the device
are for testing the device performance and may have a limited life.

Connecting the Air Hose

Insert the air connector plug into the
air socket firmly.

Connecting the AC Adapter

Insert the AC adapter plug into the
DC jack.
Next, connect the AC adapter to an
electrical outlet.
Use the specified AC adapter.
(Refer to page 14.)

Using the Monitor

(LOW BATTERY mark) blinks on the display, replace all batteries
Air Hose
Air Connector Plug
Air Socket
English 5
Step 1
Step 3
AC adapter plug
DC jack
Step 2