Using Bluetooth ® Communication - A&D TM-2441 Instruction Manual

8.8.2. Using Bluetooth
A Bluetooth device needs to be paired with a device in order to
communicate with the device. Once the recorder is paired with
a device, devices can automatically communicate.
Be sure to power off all other Bluetooth devices when pairing.
Multiple devices cannot be paired at the same time.
If the recorder is paired with another device, the first device will be
unpaired.
If devices cannot communicate after pairing, try pairing once again.
Pairing
Bluetooth ®
Step 1. Set the AUTO switch to "OFF".
Step 2. If the display is hidden, press the START/STOP
or EVENT switch to return to the waiting mode display.
Step 3. Press and hold the EVENT switch until
FlightMode ) is displayed on the OLED. The recorder starts
waiting for pairing.
Step 4. When Bluetooth pairing is complete, the
the LCD.
If you cancel the current pairing, press the EVENT switch.
The recorder proceeds to the waiting mode display.
®
Communication
Note
79
Pairing
mark is displayed on
(after