A&D TM-2441 Instruction Manual page 109

Code Meaning
Excessive body
motion.
Out of range,
30 PUL
Out of range,
30 DIA
Out of range,
60 SYS
Out of range,
10 PP
Measurement is
above 180 seconds.
Exhaust is above
90 seconds.
Heartbeat cannot be
detected.
The settings of the
interval time are
incorrect.
Zero pressure error
for safety circuit.
Relax and keep still during
measurement.
200
If these errors occur multiple times, try
another blood pressure measurement.
160
#1
SYS: Systolic blood pressure
DIA:
280
PP:
150 #1
If the inflation speed or exhaust speed is
slow, an inspection is necessary.
The exhaust speed may be slow,
an inspection is necessary.
Heartbeat cannot be detected
because of body motion, etc.
Measure the blood pressure while
relaxed and do not move.
If the interval time is set to 120 minutes,
the difference between last start time
and next start time cannot divide into
two hours perfectly.
Displays at the measurement start
time.
Release the air remaining in the cuff
completely.
89
Cause and treatment
PP = SYS - DIA
Diastolic blood pressure
Pulse pressure