A&D TM-2441 Instruction Manual page 76

Example 2 Automatic measurement
The start time for the automated measurement = 7:00,
The operation time for the automated measurement = OFF.
When the AUTO switch is set to "ON", A-BPM is started at 7:00.
A-BPM is continued according to the start time and interval of each
section until the AUTO switch is set to "OFF".
7:00
AUTO switch to "ON"
# Even if the AUTO switch is set to "OFF" and to "ON" again
during the automated measurement, the automated
measurement continues.
Example 3 Automatic measurement
The start time for the automated measurement = OFF,
The operation time for the automated measurement = 26 hours.
When the AUTO switch is set to "ON", A-BPM continues
according to the start time and interval for each section for
26 hours.
AUTO switch to "ON"
Blood pressure measurement
Section 1
Blood pressure measurement
Section 1
Section 2
AUTO switch to "OFF"
Section 2
After 26 hours
56
Not measured
Time
Not measured
Time