Other Operations - A&D TM-2441 Instruction Manual

5.3.3. Other Operations

To return from the waiting mode and show the monitor.
If the OLED or LCD display is hidden, press the
START/STOP or EVENT switch to return to the waiting
mode display.
Deleting measurement data
Step 1. Set the AUTO switch to "OFF".
Step 2. If the indication is hidden, press the START/STOP or
EVENT switch to return to the waiting mode display.
Step 3. While pressing and holding the START/STOP switch,
press and hold the EVENT switch until DataClear
(after Sleep and Display ) is displayed on the OLED.
Step 4. Select an operation.
If you wish to delete data, press and hold the START/STOP
switch.
Erasing blinks under DataClear on
the OLED and the deletion of data starts.
Proceed to step 5 after deletion.
If you keep (do not delete) data, press
the EVENT switch and proceed to step 5.
Step 5. The recorder returns to waiting mode.
25
Deleting
DataClear
OLED
Erasing