Outputting Measurement Results; Id Numbers - A&D TM-2441 Instruction Manual

6.3.3. Outputting Measurement Results

The measurement data stored in the memory can be output to the
peripheral using USB data transfer.
Refer to "8.8 Connecting the Recorder to a Dedicated Peripheral".
Do not remove the cable while using USB communication.
It may cause damage to the data.
When the battery indicator displays
used. Replace the batteries to use data transfer.

6.3.4. ID Numbers

The factory default ID number is "0".
Configure ID numbers using dedicated peripheral.
ID numbers cannot be configured with the recorder and require use of
a dedicated peripheral.
Caution
Note
, data transfer cannot be
Note
39