Initial Settings; Factory Settings - A&D TM-2441 Instruction Manual

8.2. Initial Settings

8.2.1. Factory Settings

The factory settings (initial settings) are described below:
Common items of the settings
Monitor function
Year, Month, Day, Hour, Minute
Items of A-BPM
Sleep mode
Interval time when the sleep mode is ON
Start time for section 1
Interval time for section 1
Start time for section 2
Start time for the automated measurement
Operation time of the automated measurement
The content of the factory settings
When the AUTO switch is moved to "ON", A-BPM starts.
Blood pressure is measured every 30 minutes until the switch
is moved to "OFF".
#1: The settings between the interval time for section 2 and the
interval time for section 6 are omitted because the start time
for sections 1 and 2 is the same value.
Item
Item
Factory setting
ON (indicated)
Date of shipment
47
Factory setting
OFF
30 minutes
0 hours
30 minutes
0 hours #1
OFF
OFF