6.3. Measurement Results
6.3.1. Displaying Measurement Results
The monitor function can select "Display ON" or "Display OFF" for the
A-BPM measurement result. This function cannot be used for S-BPM.
The content of the "Display ON" command includes "Pressure value
during the measurement", "Measurement result" and "Error code for
the measurement result".
When "Display OFF" is selected, the clock is displayed.
The factory setting is set to "Display ON".
Refer to "8.2.2 The Clock and the Monitor Function of
Measurement".
6.3.2. Storing Measurement Results
Data processing of the measurement result
Do not use in a strong electromagnetic field.
The memory capacity for the measurement result is 600 data sets.
When the memory is full, the
cannot perform measurement until data is deleted from the memory.
Delete data from the memory before giving the recorder to a new
patient. We recommend using the memory data of the recorder for
each person separately. If the recorder memorizes data for multiple
people, data may be difficult to process correctly.
Caution
mark is displayed and the recorder
Note
38