Operation Mode; Normal Measurement; Recalling The Data; Changing User For Memory Display - A&D Life Source UA-767FAM Instruction Manual

1. Normal Measurement

Press the START button. Blood pressure is measured and the data is stored
in memory. This device can store the last 60 measurements for each of the
four user in memory.

2. Recalling the Data

Press the
memory. The average of all measurements is
displayed, as indicated in the figure at the right.
Then, each time the
memory data is displayed as follows.
Most recent data (No.n, in the example, No.35)
Last data (No.1)
For details on recalling the data, refer to "Recalling
the Memory Data".
3.

Changing User for Memory Display

Press the
SET
The user is changed, and the average of measurement
values for that user is

Operation Mode

or button to recall the data in
button is pressed, the
button while a memory is displayed.
displayed.
English 7
PM
AM