Table of Contents
Advertisement
7.11
TRANSPORTATION ON A TRAILER OR FLATBED _______________________
1. The machine has tie-down loops front (A) and rear (B). Fasten the mower to the transport vehicle.
2. Make sure that all tie down straps are tight. Make sure that the implements are locked in the transport posi-
tion. Check the fuel and hydraulic tank caps are tight. Make sure that no part of the mower can fall during
transport.
3. Always follow the given maximum transport load weight for the towing vehicle used.
4. Ensure that you know the working weight of your mower configuration. Select a suitable vehicle for transport-
ing the mower ensuring equipment is fully secured on the trailer before transport.
5. Read the safety and operation manual of the transport vehicle before you load.
B
Slinging
When slinging the mower, damage free clamps must be used, see the
illustration, with an approved lift frame. Information is available at
www.tipnlift.co.uk.
Jacking
Check machine Jack points indicated by the decal shown.Two for each axle on
four wheel vehicles. Other axle types are different, check the Safety and
Operations Manual for the safe jack points.
OPERATION 7
A
en-65
Advertisement
Table of Contents
