Table of Contents
Advertisement
CONTROLS 6
6.2.F CUTTER SWITCH (PTO) ______________________________________________
To commence cutting ensure speed limiter is in mow
position and the units have been lowered.
Push bottom of the rocker switch and move joystick to-
wards the lower position.
To stop cutter unit rotation push top of rocker switch.
Cutting units stop rotating automatically when raised or
the operator leaves the seat.
6.2.G 4WD IN REVERSE SWITCH____________________________________________
Engages 4 wheel drive whilst the vehicle is reversing. The
switch must be held to engage.
6.2.H LIGHT SWITCH (OPTIONAL) ___________________________________________
Switches the road lights on and off.
Position 1. OFF
Position 2. Side / Marker Lights
Position 3. Main Beam.
NOTE: Position 3 requires ignition to be on.
Also there are daylight running lamps installed that automatically come on
when the ignition is switched on.
3
2
1
6.2.J ROTATING BEACON (OPTIONAL) ______________________________________
Operates the vehicles rotating beacon when a cab is not fitted.
en-31
Advertisement
Table of Contents
