Table of Contents
Advertisement
9.9.3
BACKREST EXTENSION __________________________________________
The backrest extension can be individually adjusted by
pulling it upwards or pushing it downwards over the
various locking increments up the end stop.
To remove the backrest extension, pull it upwards over
the end stop.
9.9.4
LUMBAR SUPPORT ______________________________________________
The lumbar support increases both the seating comfort
and the performance of the driver.
By turning the adjustment knob upwards, the curvature in
the upper part of the backrest cushion can be adjusted. By
turning the knob downwards, the curvature in the lower
part of the backrest cushion can be adjusted.
0 = No curvature
1 = Max. curvature at the top
2 = Max. curvature at the bottom
9.9.5
ARMRESTS _____________________________________________________
The armrests can be folded up if required and the height
individually adjusted.
To adjust the armrests for height, separate the round cap
(see arrow) from the cover, loosen the hexagon nut (size 13
mm) behind it and adjust the armrests to the desired
position (5-steps) and tighten the nut again.
Replace the cap onto the nut.
ADJUSTMENTS 9
en-103
Advertisement
Table of Contents
