Armrest Adjustment; Backrest Adjustment; Maintenance - Ransomes HR380 Manual

Ride on rotary & flail mower
Hide thumbs Also See for HR380:
Table of Contents

Advertisement

9 ADJUSTMENTS
9.9.6

ARMREST ADJUSTMENT * ________________________________________

The inclination of the armrests can be modified by turning the
adjustment knob.
When turning the knob to the outside (+) the front part of the
armrest will be lifted, when turning the knob to inside (-) it will
be lowered.
9.9.7

BACKREST ADJUSTMENT ________________________________________

Moving the locking lever upwards loosens the notching of the
backrest adjustment.
After the adjustment, the locking lever must latch into the
desired position. It must not be possible to move the backrest
into another position when it is locked.
For an ergonomic use the backrest can be adjusted in a
range of –5 to +30 degrees (15 steps of 2.5 degrees each).
9.9.8

MAINTENANCE

Dirt can impair the function of the seat,
so make sure you keep your seat clean!
Upholstery does not need to be removed from
the seat frame for cleaning.
Caution: Take care with the backrest - it may jerk forward
and cause injury!
When cleaning the backrest cushion the backrest must be
held in place when operating the backrest lever.
Attention: Do not clean the seat with a
pressure washer!
During cleaning the upholstery must not be
soaked through.
Us a standard commercially available upholstery or plastic cleaning agent. Test first for compatibility on a small,
concealed area.
en-104

Advertisement

Table of Contents
loading

Table of Contents