Table of Contents
Advertisement
8 MAINTENANCE AND LUBRICATION
8.1.5
REPLACEMENT ______________________________________________________
Bolt
Bolt
Bolt
Tensioning
Counter-
weight
V-belt
8.1.6
SKIDS ______________________________________________________________
Skid
en-74
Screws
Safety cover
Release
Lock nuts
Screws
If there are any tears or other damage on the V-belt, it
must be replaced.
•
Remove the screws, remove the safety cover.
•
Loosen the lock nuts.
•
Use the bolt to slacken the V-belt tension.
The V-belt unit consists of two narrow V-belts.
•
Fit the new V-belts
•
Check the V-belt for correct positioning
•
Tension the V-belt
•
Reassemble the safety cover
The Skids protect the machine from direct contact with
the ground. If they are not replaced in good time, the
housing of the machine will be damaged. There are
Skids on the right-hand side and left-hand side.
•
Undo nuts, remove screws and washers.
•
Remove old skid
•
Fit new runner
•
Fit new screws and washers
•
Secure screws with new nuts
Advertisement
Table of Contents
