Table of Contents
Advertisement
12.11
LAYING UNCUT GRASS __________________________________________
NOTE: Arrow indicates direction of travel.
Possible Cause
Mowing (ground) speed is too fast.
HOC set close to the actual grass height.
Too much material to clear rear of unit, brought round
the unit pushing over the grass.
Excessive cut grass wrapped on the front of the cut-
ting blades resulting in blunt blades beating the grass
down.
Grass always cut in same direction.
1
"Laying uncut grass." This problem is identified by
areas of grass that have been left uncut and laid flat.
TN1234
Cut more frequently, increase HOC.
Reduce HOC.
Reduce mowing (ground) speed.
Cut when grass conditions improve. Remove
excessive grass build up. Sharpen or replace
damaged blades.
Cut grass in opposite direction.
QUALITY OF CUT 12
Correction
en-123
Advertisement
Table of Contents
